Achieve a professional, even wood stain finish with Rustins Pre-Stain Wood Conditioner. Specifically designed to prepare bare or untreated wood before applying stain or varnish, this essential preparation product prevents streaking and blotching by sealing the wood’s porous areas. The result is a smooth, natural-looking finish that enhances the beauty of your wood surfaces both indoors and outdoors.

Key Features & Benefits:

• Prepares Bare Wood for Staining & Varnishing:
  Conditions porous and uneven wood surfaces, helping stains and varnishes absorb evenly for consistent colour and sheen.
• Reduces Streaking & Blotching:
  Minimises uneven absorption, particularly on softwoods and open-grain hardwoods, where blotching is common without conditioning.
• Natural Finish:
  The conditioner dries clear and does not affect the natural appearance of the wood, ensuring that the chosen stain or varnish colour is showcased beautifully.
• Versatile Use:
  Suitable for both indoor and outdoor woodwork, including furniture, doors, panelling, and decking.
• Easy Application:
  Simple to apply with a brush or cloth, drying quickly to allow staining or varnishing soon after conditioning.

Technical Specifications:

Specification Details Product Type Pre-Stain Wood Conditioner Finish Natural (Clear) Base Type Solvent-based formulation Application Brush or lint-free cloth Suitable for Bare & untreated wood surfaces Coverage Varies by wood type; approx. 12m per litre Boxed Dimensions (W x H x D) 8.0cm x 7.5cm x 7.5cm Boxed Weight 350g Recommended Areas Interior & Exterior use Country of Manufacture United Kingdom

Application Instructions:

1. Surface Preparation:
2. Ensure the wood is clean, dry, and free from dust, grease, wax, or previous coatings. Sand smooth if necessary.
3. Applying the Conditioner:
4. Stir the product well before use.
5. Apply generously with a brush or cloth, following the direction of the wood grain.
6. Allow to penetrate for 515 minutes, then wipe off any excess with a clean cloth.
7. Drying Time:
8. Allow the conditioner to dry for at least 30 minutes before applying your chosen wood stain or varnish.
9. Staining/Varnishing:

• • Apply stain or varnish as per the manufacturers instructions. For best results, test on an inconspicuous area first.

Recommended Uses:

• Furniture restoration and preparation
• Interior joinery such as skirting boards and doors
• Wooden panelling and beams
• Outdoor woodwork like sheds, fences, and decking

Care & Maintenance:

• No special maintenance required for the conditioner itself.
• Protect finished surfaces according to the recommendations of your chosen stain or varnish.

FAQs:

• Q: Can I use this product on previously stained or sealed wood?
  A: No, it is designed for bare or untreated wood. Previously coated surfaces should be fully stripped and sanded first.
• Q: Does this conditioner change the colour of the wood?
  A: No, it dries clear and does not affect the wood’s natural colour.
• Q: How long after applying the conditioner should I wait before staining?
  A: Stain can be applied 30 minutes after conditioning, but do not leave longer than 2 hours for optimal results.
• Q: Is it suitable for hardwood and softwood?
  A: Yes, it works on both hardwoods and softwoods to help provide an even stain finish.

Safety & Storage:

• Use in a well-ventilated area.
• Keep away from heat and open flames.
• Store in a cool, dry place with the lid tightly closed.
• Keep out of reach of children.

Warranty & Support:

Rustins products are made to the highest quality standards. For technical assistance or product advice, contact Rustins’ customer support team.